Terp Tower (Multi-Pack)

The Terp Tower is an adaptation of a tradition pillar used in a slurper design.

Made of high quality GE214 Grade Quartz, the Terp Tower design has increased surface area and adapted airflow allowing air in and around the Tower. This increases the rate of vaporization inside the chamber, while also reducing splash and increasing efficiency compared to a traditional pillar. Made of either three or four individual rods welded together at the tips, each Tower has a comparable if not greater mass to a traditional pillar design, but can increase surface area by over 100%! (See Image 4).

This all contributes to a much more efficient vaporization inside your slurper, with your liquid maintaining constant exposure to the heated surface and utilizing the increased surface area and mass of the Terp Tower design.

//

Which Terp Tower is best for my slurper?

Because the Tower design allows for airflow in/around it, you are able to size up your Tower closer to the inner dimension of your slurper without creating extra splash/bouncing issues.

The average slurper has an inner diameter of 10mm for the stem/barrel section. But some companies slurpers may have a small lip weld (see image 5) where this section is connected, so be aware to pick the best size based off of your individual slurper!

(See Image 3 for full Terp Tower dimensions list)

- A 7.1mm wide Tower is a safe universal option or for a slurper with a restricted lip weld.
- A 7.6mm wide Tower is best in slurpers with a small lip weld.
- An 8mm wide Tower is for use in slurpers with a minimal to no lip weld.
- And the tiny 6mm and 6.5mm wide Towers are best in all mini slurpers with a narrower bore.

I personally like the widest option my slurpers can accept, but variety is the spice of life!

Multi-Pack #1 :
- Single 4x 3mm (1mm Spacing) 8mm Width
- Single 4x 2.5mm (1.5mm Spacing) 7.6mm Width
- Single 4x 2.5mm (1mm Spacing) 7.1mm Width
- Single 3x 2.5mm (1.5mm Spacing) 6.5mm Width
Multi-Pack #2 :
- Single 4x 2.5mm (1.5mm Spacing) 7.6mm Width
- Single 4x 2.5mm (1mm Spacing) 7.1mm Width
- Single 3x 3mm (1mm Spacing) 7.1mm Width
- Single 4x 2mm (1mm Spacing) 6mm Width
Multi-Pack #3 :
- Single 4x 2.5mm (1.5mm Spacing) 7.6mm Width
- Single 3x 3mm (1.5mm Spacing) 7.6mm Width
- Single 4x 2.5mm (1mm Spacing) 7.1mm Width
- Single 3x 3mm (1mm Spacing) 7.1mm Width

Please specify any specific lengths you may need in the order notes, standard length is 20mm.